LGTF Exit Exam Questions and Answers of 2024 Latest updated MCQ contain approx 30 questions Set.
LGTF (Liquefied Gas Tanker Familiarization) is one of the basic modular courses that are required by the STCW (Standards of Training, Certification, and Watchkeeping) convention for all seafarers.
LGTF Exit Exam Questions and Answers of 2024 Latest updated MCQ contain 30 questions Set.
1. Find the correct statement in monitoring a typical HSE Performance Indicator.
A) Lost time Injury frequency (LTIF) – the number of Incidents of injury resulting in lost time per 1 million man-hours worked
B) Total recorded case frequency (TRCF) – the number of recorded Incidents per 1 million man-hours worked
C) Both the LTIF and TRCF
2. What are typical set point values for the insulation spaces’ pressure relief valves ?
A) 200 mbar above atmospheric pressure
B) -200 mbar below atmospheric pressure
C) – 10 mbar above atmospheric pressure
D) -10 mbar below atmospheric pressure
3. Why should we maintain a low cargo tank pressure during the inerting operation?
A) To reduce the consumption of inert gas
B) To allow inert gas to flow in faster into the tank
C) To reduce mixing of inert gas and air during displacement
D) To prevent over pressurization of the cargo tanks and activation of cargo safeties
4. What is the limitation of a combustible gas detector of catalytic combustion type?
A) It cannot be used for measurement in air
B) It cannot be used for measurement in nitrogen
C) It cannot be used for measurement in methane
D) It cannot be used for measurement in oxygen
5. Which of the following machinery is used for the initial pressurization of insulation spaces?
A) Boiler
B) Evaporator
C) Nitrogen generator
D) Vacuum pump
6. How many portable multi-gas detectors should be carried on board?
A) At least one with methane gas and one with propane gas detection capability
B) At least one with methane and one with carbon monoxide gas detection capability
C) At least one with methane gas and one with ammonia gas detection capability
D) At least two sets with methane gas detection capability
7. What is the type of gas detection system fitted to monitor gas content of the insulation spaces?
A) Continuous measurement system using catalytic combustion type
B) Infrared type / sequential measurement
C) Portable gas detection system due to mobility of this method
D) Spot metering type fixed inside the individual insulation spaces
8. Which is the melting point temperature of the ESDS automatic fusible element normally fitted onboard?
A) Between 200°C to 206°C
B) Between 50°C to 55°C
C) Between 72°C to 78°C
D) Between 98°C to 104°C
9. Under the pneumatic link system, what will happen when the ship moved off the jetty exceeds its safe working
A) limits (distances)
B) Hose – break
C) Air pressure – drop
D) Alarms sounded and ESD activated
E) Hose – break, Air pressure – drop, ESDS – Alarms sounded and ESD activated
10. Which is the melting point temperature of the ESDS automatic fusible element normally fitted onboard?
A) Between 200°C to 206°C
B) Between 50°C to 55°C
C) Between 72°C to 78°C
D) Between 98°C to 104°C
11. In ship’s ESDS, an automatic electrical system which energizes ESDS due to temperature change of the sensor, fitted at each tank domes and both manifold platforms are known as
A) Automatic fusible elements
B) Automatic push button
C) Infrared gas detection system
D) Automatic heat sensors
12. LNG vapors explode when it is mixed with air within the flammable range gas volume.
A) 25-30%
B) 5-15%
C) 40-50%
13. The stationery powder post should have a minimal capacity of.
A) 3.5kg/second
B) 2.5kg/second
C) 15.kg/ second
14. What is the range of expansion ratio for high expansion foams?
A) 1000:1
B) 5:1 to 15:1
C) 1250 liters/min
15. A glass bulb under the cap of the soda acid type- water extinguisher has a solution of
A) Dilute Hydrochloric Acid – HCI
B) Concentrated Sulfuric Acid- H2SC>4
C) Dilute Sulfuric Acid- H2SO4
D) Concentrated Hydrochloric Acid- HCI
16. RICE stands for
A) A staple food in India
B) Rest, ice, compression and elevation
C) Research, investigation, complication and end result
D) Real international continuing education
17. Classification of burns and scalds include the following except.
A) First degree
B) Second degree
C) Third degree
D) Fourth degree
18. Identify the correct statement from the following list, that describes the dangerous gases emitted from a sewage tank correctly
A) Methane and hydrogen sulfide
B) Ethane and hydrogen
C) Methane and hydrogen peroxide
D) Methane and carbon-di-oxide
19. What does the pressurizing of insulation spaces with nitrogen and maintaining a slightly higher pressure than the atmospheric pressure prevent?
A) Formation of explosive mixtures; ingress of moisture and air
B) Fall in cargo tank temperatures
C) Collapse of the inflated insulation boxes
D) Accidental formation of vacuum leading to membrane collapse
20. Onboard an LNG carrier, what is the maximum allowable filling limit as per the IMO /IGC regulation?
A) 98.5%
B) 98.6%
C) 98%
D) 99.0%
21. What does the pressurizing of insulation spaces with nitrogen and maintaining a slightly higher pressure than the atmospheric pressure prevents?
A) Formation of explosive mixtures; ingress of moisture and air
B) Fall in cargo tank temperatures
C) Collapse of the inflated insulation boxes
D) Accidental formation of vacuum leading to membrane collapse
22. Onboard an LNG carrier, what is the maximum allowable filling limit as per the IMO /IGC regulation?
A) 98.5%
B) 98.6%
C) 98%
23. What does the pressurizing of insulation spaces with nitrogen and maintaining a slightly higher pressure than the atmospheric pressure prevents?
A) Formation of explosive mixtures; ingress of moisture and air
B) Fall in cargo tank temperatures
C) Collapse of the inflated insulation boxes
D) Accidental formation of vacuum leading to membrane collapse
24. What is the consequence of ice formation in a cargo tank?
A) Burst in the discharge line
B) Formation of cold spot in ballast tank
C) Possible damage to the cargo pump during discharge
D) Icing – up of the discharge pump
25. A gas has to be cooled below Its critical temperature to be liquefied? Choose your comment.
A) False
B) True
26. During the dilution method of gas replacement, where does the concentration of existing gas drop faster?
a. Tank outlet
b. It is uniform all over the tank
c. Tank bottom
d. Tank Inlet
27. During heat transfer from one body to another, what transfer takes place?
A) Molecule
B) Power
C) Electron
D) Energy
28. What is the IGC code definition for a liquefied gas?
A) Product having a saturated vapor pressure of 2.8 bar absolute at 37.8°C/100 °F
B) Product having a saturated vapor pressure of 1.76 bar absolute at 37.8°C/100 0 F
C) Products having a saturated vapor pressure of 1.76 bar absolute at 38.7°C/102 ° F
D) Product having a saturated vapor pressure of 2.8 bar absolute at 38.7°C/102 0 F
29. How can a gas be liquefied?
A) By mixing gases of higher specific density
B) By the application of pressure or by cooling
C) By fusion in a closed chamber
D) By evaporation in a closed chamber
30. Why is LNG liquefied for sea transportation?
A) The ship can choose the form of natural gas or LNG to be loaded
B) It makes it more economical to transport
C) Natural gas transportation by sea Is banned
D) LNG has a higher calorific value than natural gas thus increases revenue
31. Up to what temperature is methane vapor heavier than air?
A) -161.5°C
B) 15° C
C) -121.5°C
D) -110.5°C
32. In case of heating the mercury column containing the test liquid, the level of mercury will
A) Increase
B) Decrease
C) Remain same
33. Why Is LNG liquefied for sea transportation?
A) The ship can choose the form of natural gas or LNG to be loaded
B) It makes it more economical to transport
C) Natural gas transportation by sea is banned.
D) LNG has a higher calorific value than natural gas thus increases revenue